Harvesters/Processors For Sale
Photo |
Title
|
Make | Model | Year | Price |
John Deere 803MH with Waratah 622B ***SOLD***2019 John Deere 803MH with Waratah 622B Processing Head. Hour meter reads 6,450 hours. 24" double grouser pads, undercarriage is estimated at 75%. New pins & bushings, feed roller hoses and motor, knife arms. Boom cylinders gone through, new spherical bearings. Swing motors, final drives, & all air/oil/fuel filters all within the last 600 hours. Engine valves adjusted and pressure gone through. H16 computer system. Espar preheat system. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
John Deere | 803MH | 2019 |
$Call for Price
|
|
Valmet 911.3 Harvester with a 360.2 Head ***SOLD***2006 Valmet 911.3 Harvester with a 360.2 Head. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders. Tight boom and boom base, tight carrier good center section, bogies are in good working order, 710 tires, tracks are @ 70%, chains are @ 90%. 360.2 head has a new roller, grab arm and measuring wheel are in good condition. Maxi computer system, updated saw motor, GB bar system, Joystick controls. Many extra parts joysticks, extra parts head. Heat, A/C, LED lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Valmet | 911.3 | 2006 |
$Call for Price
|
|
Ponsse Fox 8 Wheel Harvester with a H6 Head ***SOLD***2011 Ponsse Fox 8 Wheel Harvester with a H6 Head. Hour meter reads 14,000 hours. Mercedes Benz engine starts & runs good, Webasto preheat system, fire suppression system, & computer and measuring system are all in good working order. Strong hydraulics and cylinders, tight parallel boom and base, squirt boom works as it should. H6 head is in good working order. 700 tires at 75% with one set of Eco Tracks. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Ponsse | Fox | 2011 |
$Call for Price
|
|
Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head2010 Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head. Hour meter reads 13,000 hours. Mercedes Benz engine starts and runs good, Webasto preheat system, fire suppression system, & computer and measuring system are all in good working order. Strong hydraulics and cylinders, tight parallel boom and base, squirt boom works as it should. 2015 H6 head is in good working order. 700 tires estimated at 75% with one set of Eco Tracks. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Fox | 2010 |
$Call for Price
|
|
Ponsse Scorpion King Harvester2020 Ponsse Scorpion King Harvester. 5,400 hours on hour meter. 10m C50 crane, H7 processing head, & 710-45x26.5" tires at 90%. Black Bruin RH3016 and double brake link, fixed back delimbing knives, thumbnail feed rollers, & saw box lights. This machine has three cameras (engine side and reverse), LED lights, radio, heat, A/C. Also has the fridge, food heater, & sunshades. This machine is ready for the woods. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Scorpion King | 2020 |
$Call for Price
|
|
2011 Timberpro TN725BMachine has 6800 Hrs. with an Updated computer system. |
Timberpro | TN725B | 2011 |
$Call for Price
|
|
Timbco T415C Harvester with Ponsse H73 ***SOLD***1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,786 hours. John Deere 6068T Engine. Starts and runs good. Single grouser pads. Undercarriage is at 70%. Pins and bushings are good. Very clean and straight unit, extendable boom, has a newer pump. The 2006 Ponsse H73 Processing Head has around 4500 hours. 30" Processing Head. Grab arms and feed rollers are in good working order. Enclosed cab has heat, a/c, radio, & lights. Dry & tight machine that's ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Timbco | T415-C | 1998 |
$Call for Price
|
|
Ponsse Fox Processor H6 Processing Head ***SOLD***2019 Ponsse Fox 8 Wheeled Processor with H6 Processing Head. Hour meter reads 9,700 hours. Mercedes engine starts and runs good. 710x26.5 tires are estimated at 60%. 2 sets of 1/2 tracks are included and are like new. C44+ 10m crane, with an H6 processing head. The 3 feed rollers are in good condition. Measuring system works well. Ponsse Opti information system. Ponsse OptiControl hydraulic system. New parts, oils, and maintenance has just been done. Can include a service trailer that has an air compressor, hose crimper, hoses, fittings, and an $8,000 spare swing motor for an additional $20,000. Cab has heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. ***SOLD*** |
Ponsse | Fox | 2019 |
$Call for Price
|
|
Valmet 425EXL Processor with Rolly II ***SOLD***2004 Valmet 425EXL Processor with Rolly II Processing Head. Hour meter reads 19,800 hours. Cummins QSC 8.3 engine starts and runs good. Woodland Eaton computer system. 24" double grouser pads. Undercarriage is at 90%. New pins and bushings in boom, new bushings in the leveling cylinder, recently repacked main boom cylinder. New converter, new fuel pump, new fuel injection pump. The Rolly II head is in good condition. Was a rebuild from 2016. Roller and feed wheels are in good shape. Enclosed cab has heat, A/C, & radio. This machine is ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD*** |
Valmet | 425EXL | 2004 |
$Call for Price
|
|
John Deere 3554 with Waratah 624 ***SOLD***2004 John Deere 3554 with Waratah 624 Super Processing Head. Hour meter reads 20,649 hours. John Deere 6081H engine starts and runs good. 28" double grouser pads, undercarriage is estimated at 70%. New computer in the head, recently resealed valves in the head, rebuilt measuring wheel, and repacked cylinders for feed rollers. Air intake preheater, heat, A/C, & Bluetooth radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. ***SOLD*** |
John Deere | 3554 | 2004 |
$Call for Price
|
|
2014 RottneMachine runs and works as should. This harvester has a SP 561 Head. |
- | - | 2023 |
$Call for Price
|
|
John Deere 1270E PartsWe have a John Deere 1270E that we are parting out. Call Delvin at Cell: +1 715-699-6271 for availability and pricing |
- | - | Unknown |
$Call for Price
|