Harvesters/Processors For Sale

2020 Ponsse Scorpion King with H7 Harvesting Head. Hour meter reads 4,000 hours. Mercedes Benz OM936, 285 HP, Tier 4F engine. 710/45-26.5 Nokian Forest King F2 tires are estimated at 90%, includes two sets of tracks that are estimated at 75%. C50 crane and center section are tight. Ponsse H7 harvesting head is in good condition, measuring system is in working order. DAFO fire suppression system. Webasto preheat system. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2001 Timberjack 608S Processor with 2005 Log Max 7000C Processing Head. Strong hydraulics and cylinders, ITR undercarriage has approximately 1,150 hours of use - rollers, sprockets and rails, 24" pads are in good shape. New pins and bushings in the boom 950 hours ago. 2005 Log Max 7000C is in very good condition, 5,960 hours, Logmate 402 computer, feed wheels and knives are in good shape, very little welding on head. Flex air reversible fan, Espar pre-heater system, heat, A/C, and LED lights. Machine is extremely straight and dry for it's age. All panels open and close as they should. No hydraulic leaks were visible. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

2008 Valmet 425EXL Harvester with Quadco 5660 Head. Hour meter reads 9,310 hours, newer Cummins 8.3L engine has 1,609 hours. New main auxilliary pump was installed summer of 2022. 24" single grouser pads, undercarriage is estimated at 80%, some rollers will need to be replaced. Quadco 5660 intermittent harvesting head, feed wheels and motors are in good working order. Newer main saw, rollers, bearings, gears, and ring gear. Espar preheat system, heat, A/C, & leveling cab. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southcentral USA. ***SOLD***

2022 Ponsse Ergo 8 Wheeled Harvester with Ponsse H8 Harvesting Head. Hour meter reads 3,189 hours. 710/45-26.5 front & rear tires are estimated at 90%. Pewag tracks are estimated at 90%. C5 crane is in good condition, boom is tight, hoses are good. Ponsse H8 harvesting head, no welds or cracks. Feed wheels, knives, and hood are in good condition. Few hoses could be replaced. Webasto preheat system. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2019 Ponsse Beaver with new Ponsse H6 Harvesting Head. Hour meter reads 10,095 hours. C44 crane, H6 harvesting head is brand new with 0 hours. Tires are estimated at 75%. Webasto preheat system, heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. ***SOLD***

1996 Timberjack 1270A with Waratah 762B Processing Head. Hour meter reads ~22,000 hours. Perkins engine runs good. 700 & 650 tires are estimated at 20-40%. Comes with set of bogie tracks at 80%. Has a new injector pump and overhead was done recently. Waratah 762B head is in good shape, auto feed will need to be looked at but cuts good and the knives are in good shape. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***