Harvesters/Processors For Sale
Featured in Harvesters/Processors
Photo |
Title
|
Make | Model | Year | Price |
2017 Timberpro 725C2017 Timberpro with a JP Skidmore CF22 Processing head, In very nice shape, There is a Webastp pre heater installed , has Double grouser style pads, with undercarriage at 75%. the Heat ad AC both work great, the interior an exterior has been very well taken care of and is great shape. We do take trades and we can assist with trucking and financing as well! Thank you for looking! |
- | - | - |
$225,000
|
|
2014 Ponsse ErgoThis Ponsse Ergo came right from working on a job to our lot, the general appearance of this unit is excellent, all panels and doors and Glass are nice and straight ,the 2 speed transmission works well. There is a wabasto preheater installed as well. We have just installed new batteries on this machine. The Trelleborg 710-45-26.5 tires are at 75%. This machine comes with 2 sets of tracks as well. We do take trades and we can assist with trucking and financing as well. Thank you for looking! |
- | - | - |
$189,500
|
|
2018 Tigercat 1185The 1185 is amply powered by the Tigercat FPT N67 Tier 4f engine, rated at (230 kW) 308 hp. The drivetrain components — including the the pump drive, transmission and the hydraulically balanced bogie axles — are engineered and built by Tigercat for extreme forest duty, long life and high uptime. Tigercat’s unique WideRange drive system increases working travel speed while delivering extremely powerful tractive effort for high performance in steep terrain and quick in-stand travel on good ground. The 1185 blends high performance with fuel efficiency through the use of advanced hydraulic circuits. Dedicated pumps power the drive, harvesting head, crane, fan and cooling circuit functions. In addition, a closed loop drive system provides excellent performance and response on steep slopes. A pressure and flow controlled piston pump drives the cooling fan, maintaining optimal operating temperatures at the lowest possible fan speed. The crane features Tigercat’s efficient and operator-friendly ER technology. The hooked profile of the main boom promotes excellent right-side visibility. Not only is the crane efficient but also simple in design, without external parallel linkages. There are two stick boom options — fixed or telescopic. With an extreme duty slew system and 360° continuous rotation, the cabin rotates with the crane. The cabin is spacious with excellent visibility and clear line-of-sight to the wheels. The curved windshield affords excellent upward visibility along with patent pending protective technology. Operators will find all the creature comforts including a comfortable and highly adjustable climate controlled seat with a four-point harness and full Bluetooth connectivity. This machine will come with 2 sets of tracks. We do take trades and we can assist with trucking and financing if needed! Thank you for looking!! |
- | - | - |
$449,500
|
|
2016 Timberpro 725CThis is a nice straight unit, with just over 8000 hrs, It has a JP Skidmore processing head, and an Eberspacher preheater, 24" Double grouser style pads, with the undercarriage at roughly 75%, The 2 speed transmission with forward and reverse. We do take trades and we can assist with trucking and financing as well. Thank you for looking! |
- | - | - |
$235,000
|
|
2007 VALMET 415EX 1263This machine is in good shape, all of the panels guards, doors etc are in nice shape. The head is a Rolly II head on it. It has a DASA computer system installed, has a Webasto Preheater, has a Sisu 6cylinder engine, & a 2 speed transmission with high and Low range. The under carriage is at about 80% with 23.5 Double grouser pads. We do take trades and we can assist with Financing and trucking if needed Thank you for looking |
- | - | - |
$89,500
|
|
2012 CAT 501HDThis is a nice unit thats ready to hit the woods, Everything is in good shape, The Tracks are 24" x 8" double grouser style pads at 50% , and sprockets and idlers are at about 75%. This machine has the 2 roller skidmore conversion as well. The serial number for the PF-48 head is PH00829 . We do take trades and we can assist with trucking and financing as well if needed. Thank you for looking!! |
- | - | - |
$149,500
|
|
HAHN 110 Self Propelled Harvester1984 Hahn 110 Self Propelled Harvester. This machine has a Detroit 353 engine, runs and starts good, strong hydraulics and cylinders, strong pumps, drive system is in working order, tight boom and grapple, rollers, delimber and knives are in good order, strong brakes, heavy duty tires. Also has parts machine, extra orbit motor swing gear, engine and pumps, & boom. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Hahn | 110 | 1984 |
$9,900
|
|
Valmet 503 Harvester with a 16" Head ***SOLD***1989 Valmet 503 Harvester with a 16" Head. hour meter reads 6,800 hours, 4 cylinder John Deere engine, runs and starts, will need some injectors soon, new right final drive, new joysticks, quick couplers. 23.1 x 26 tires set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Valmet | 503 | 1989 |
$Call for Price
|
|
Timberjack 2518 Harvester with Bar Saw Head1992 Timberjack 2518 Harvester with Bar Saw Head. Brand new John Deere engine installed. 24" double grouser pads, undercarriage is in good working order. Bar saw felling head has good hoses and works as it should. Leveling cab with heat. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timberjack | 2518 | 1992 |
$35,000
|
|
HAHN HSW 110B Self Propelled Harvester ***SOLD***1993 HAHN HSW 110B Self Propelled Harvester. This equipment starts and runs good, no major oil leaks. This machine was rebuilt in 2004 with a new crate JD engine. list of repairs, rebuilt inside long stroke/delimber cylinder, new right top knife cylinder, rebuilt cab tilt cylinder, new alternator, replaced front tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located Northeast USA. ***SOLD*** |
Hahn | HWS 110B | 1993 |
$45,000
|
|
Morbark Wolverine Three Wheel ***ON HOLD***1995 Morbark Wolverine with a Hahn HSG140 Processor Head. Hour meter reads 5,200 hours, Cummins 4BT engine, runs and starts good, strong hydraulics and controls, tight boom, head is in good working order, extra bars and chains, 23.1x26 tires, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD*** |
Morbark | Wolverine | 1995 |
$28,900
|
|
Timberjack 1270A with Waratah 762B ***ON HOLD***1996 Timberjack 1270A with Waratah 762B Processing Head. Hour meter reads ~22,000 hours. Perkins engine runs good. 700 & 650 tires are estimated at 20-40%. Comes with set of bogie tracks at 80%. Has a new injector pump and overhead was done recently. Waratah 762B head is in good shape, auto feed will need to be looked at but cuts good and the knives are in good shape. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD*** |
Timberjack | 1270A | 1996 |
$19,900
|