Harvesters/Processors For Sale
| Photo |
Title
|
Make | Model | Year | Price |
|
Timberjack 608S with 2005 Log Max 7000C ***SOLD***2001 Timberjack 608S Processor with 2005 Log Max 7000C Processing Head. Strong hydraulics and cylinders, ITR undercarriage has approximately 1,150 hours of use - rollers, sprockets and rails, 24" pads are in good shape. New pins and bushings in the boom 950 hours ago. 2005 Log Max 7000C is in very good condition, 5,960 hours, Logmate 402 computer, feed wheels and knives are in good shape, very little welding on head. Flex air reversible fan, Espar pre-heater system, heat, A/C, and LED lights. Machine is extremely straight and dry for it's age. All panels open and close as they should. No hydraulic leaks were visible. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Timberjack | 608DS | 2001 |
$Call for Price
|
|
Timberjack 1270B with 762C Processing Head ***SOLD***1999 Timberjack 1270B with 762C Processing Head. Hours are estimated at 22,500 hours. DT 466 engine, hydrostatic transmission. 700/55-34 & 700/50-26.5 tires are estimated at 75%. Newer main pressure and pilot valves. Tight center, pins, & bushings. Squirt boom. Timberjack 3000 computer system. 762C processing head has newer saw assembly, bearing, & auto chain tightener. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Timberjack | 1270B | 1999 |
$Call for Price
|
|
Valmet 425EXL Harvester with Quadco 5660 Head ***SOLD***2008 Valmet 425EXL Harvester with Quadco 5660 Head. Hour meter reads 9,310 hours, newer Cummins 8.3L engine has 1,609 hours. New main auxilliary pump was installed summer of 2022. 24" single grouser pads, undercarriage is estimated at 80%, some rollers will need to be replaced. Quadco 5660 intermittent harvesting head, feed wheels and motors are in good working order. Newer main saw, rollers, bearings, gears, and ring gear. Espar preheat system, heat, A/C, & leveling cab. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southcentral USA. ***SOLD*** |
Valmet | 425EXL | 2008 |
$Call for Price
|
|
Ponsse Ergo Harvester with Ponsse H8 Head2022 Ponsse Ergo 8 Wheeled Harvester with Ponsse H8 Harvesting Head. Hour meter reads 3,189 hours. 710/45-26.5 front & rear tires are estimated at 90%. Pewag tracks are estimated at 90%. C5 crane is in good condition, boom is tight, hoses are good. Ponsse H8 harvesting head, no welds or cracks. Feed wheels, knives, and hood are in good condition. Few hoses could be replaced. Webasto preheat system. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2022 |
$Call for Price
|
|
Tigercat 822E with 570 Harvesting Head2023 Tigercat 822E with 570 Harvesting Head. Hour meter reads 48 hours. 24" single grouser pads. This unit was built as a processor from the factory. HO LED lights, Sirius Radio, CB radio, & engine pre-heater. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Tigercat | 822E | 2023 |
$Call for Price
|
|
2018 Komatsu 931XC-2 Processor2018 Komatsu 931XC-2 Processor with C144 Head 5500 Hours, Auto grease system Very Very Clean machine, Well maintained. Call for Price |
Komatsu | 931XC-2 | 2018 |
$Call for Price
|