Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
Timbco 425EXL Feller Buncher with Timbco 233 Bar Saw2006 Timbco 425EXL Feller Buncher with Timbco 233 Bar Saw Head. Hour meter reads 9,754 hours. Cummins 8.3L engine. 24" single grouser pads, undercarriage is estimated at 75%. Timbco 233, 33" bar saw felling head is in good working condition. Leveling system in working order. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 425EXL | 2006 |
$72,500
|
|
Bandit 1850XP Tracked Chipper1998 Bandit 1850XP Track Chipper. Hour meter reads 4,000 hours, unknown if original. New Cummins 250hp engine and new glass. New master switch. Boom and grapple are tight. Ready for work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | 1850XP | 1998 |
$81,500
|
|
Morbark Model 16 Disc ChipperMorbark Model 16 Disc Chipper. Hour meter reads 3,500 hours. CAT 3208 engine starts and runs good. Loader with cab. Loader has a rotator for grapple installed with additional pedal. Two chutes included, one for piles and one to load trucks. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | Model 16 | Unknown |
$36,500
|
|
Ponsse Elk 8 Wheeled Forwarder2021 Ponsse Elk 8 Wheeled Forwarder. Hour meter reads 2,200 hours. Mercedes OM 934 engine. 710/45-26.5 tires are estimated at 90%. Active crane and auto-grease. Webasto preheater. K70 crane and SuperGrip bucket are tight. Heat, A/C, LED lights, radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Elk | 2021 |
$295,000
|
|
2007 Valmet 840.3Very strong Turbo diesel engine,6x6,Differential lock,Valmet CRF 8.1 crane, extendable boom, Bypass Grapple with rotator,, Approximately 72" decking blade, EROPS, Joystick controls, Heat and AC, Radio, Maxi monitor, 600/65-34 front tires, 600/55R26.5 rears. We do take trades and we can assist with trucking and financing as needed! Thank you for looking!! |
- | - | - |
$79,500
|
|
Ponsse Ergo Harvester with H73E Harvesting Head2004 Ponsse Ergo 6 Wheeled Harvester with 2007 H73E Harvesting Head. Hour meter reads 15,925 hours. 710/45-26.5 tires are estimated at 65%. 2007 H73E head is in good overall condition. All lights are working. Heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2004 |
$46,500
|
|
Ponsse Ergo Harvester with Ponsse H8 Head2022 Ponsse Ergo 8 Wheeled Harvester with Ponsse H8 Harvesting Head. Hour meter reads 3,189 hours. 710/45-26.5 front & rear tires are estimated at 90%. Pewag tracks are estimated at 90%. C5 crane is in good condition, boom is tight, hoses are good. Ponsse H8 harvesting head, no welds or cracks. Feed wheels, knives, and hood are in good condition. Few hoses could be replaced. Webasto preheat system. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2022 |
$Call for Price
|
|
2015 Ponsse Buffalo 8X8AWSOME Ponsse Buffalo comes with set of tracks. One owner since new . All maintenance records, one operator since new. Machine is tight and ready for work selling equipment due to retirement. Before Def engine....... |
Ponsse | Buffalo | 2015 |
$200,000
|
|
2016 Ponsse ErgoOne owner since new with all service and repair records. One operator since new. Custom Ponsse Big Boy luxury seat. Machine has approximately 9,900 hours. Has a H 7 head. Please text or call for more information 906 630 0067 |
Ponsse | Ergo | 2016 |
$295,000
|
|
2016 Timberpro 725CThis is a nice straight unit, with just over 8000 hrs, It has a JP Skidmore processing head, and an Eberspacher preheater, 24" Double grouser style pads, with the undercarriage at roughly 75%, The 2 speed transmission with forward and reverse. We do take trades and we can assist with trucking and financing as well. Thank you for looking! |
- | - | - |
$235,000
|
|
2015 XT430-3This machine is in excellent shape , It has double grouser style pads that are at about 75%.It has a rotating cab , and 2 speed hydrostatic transmission. it has a Quadco 360 degree rotating head . We just had the knife cylinders repacked and sealed, as well as the main lift cylinder repacked. There was a new fuel pump installed 14 hours ago as well. We do take trades and we can assist with trucking and financing as well. Thank you for looking! |
- | - | - |
$249,000
|
|
2017 Timberpro 725C2017 Timberpro with a JP Skidmore CF22 Processing head, In very nice shape, There is a Webastp pre heater installed , has Double grouser style pads, with undercarriage at 75%. the Heat ad AC both work great, the interior an exterior has been very well taken care of and is great shape. We do take trades and we can assist with trucking and financing as well! Thank you for looking! |
- | - | - |
$225,000
|